登車橋的材質應該如何選擇？

2022-11-16 16:13:18

1474次

、登車橋 http://www.8kvv.com/主體支架應該采用特制異型鋼管

，輪胎建議使用高強度耐負荷高壓輪胎。
Ramps body should adopt special shaped steel bracket, tire load is recommended to use high-intensity resistance to high pressure tires.

、登車橋油缸采用高精度耐磨油缸

，臺面材料采用8mm防滑網

。
Ramps cylinder wear-cylinder high-precision, non-slip surface material using 8mm net.

3、登車橋液壓油建議使用32號抗磨液壓油

，液壓油管用高壓雙層鋼網橡膠管

。
Ramps hydraulic oil is recommended to use 32 anti-wear hydraulic oil, hydraulic tubing with high pressure double steel mesh rubber tube.

4、登車橋 http://www.8kvv.com/配置的剎車塊可有效防止貨車裝卸時登車橋移位

，可調節長度的索鏈能方便地鉤住貨車,使登車橋與貨車始終緊密貼合，采用手搖液壓泵作動力

，勿需外接動力電源即可輕松實現登車橋的高度調節

。
Ramps configured brake blocks Ramps can effectively prevent displacement during loading and unloading trucks, can adjust the length of the tether can be easily hooked truck, so Ramps always fit closely with the truck, using a hand pump for power Needless to an external power supply can be easily Ramps height adjustment.

上一篇：升降貨梯潤滑油涂抹注意事項

下一篇：固定式升降機