升降貨梯管道清洗方法

因?yàn)?a href="../">升降貨梯http://www.8kvv.com/的所占面積和位置的緣故，每個液壓升降平臺所需流量為20L／nin，若是全數管道同時進行輪回沖洗成本太高，所以，我們?cè)谟?jì)劃液壓系統時就必需考慮管道的清洗以降低升降貨梯的本錢。下面濟南榮凱升降機械的有關專家給大家介紹一下升降貨梯管道清洗的方法。

1、升降貨梯管道酸洗即是在配制液壓管道之前，冷拔管的酸洗除銹，酸洗的體例可接納槽式浸泡酸洗或輪回酸洗。不答應接納噴沙除銹體例，我們接納的是槽式浸泡酸洗，并接納自己配制的酸洗配方和工藝流程。其酸洗工藝流程和配方如下：經由上述流程和配方酸洗的管道呈顯全金屬本色，無銹斑、無雜質。
Pipeline pickling cargo lifter that is before the preparation of hydraulic pipes, pickling rust cold drawn tubes, pickling style soaking trough admissible pickling pickling or reincarnation. Sandblast rust style does not agree to accept, we accept the trough immersion pickling, and prepared to accept their own pickling recipes and processes. Pickling process and its formula is as follows: via the pipeline pickling processes and formulations were significantly Full Metal color, no rust, no impurities.

2、升降貨梯http://www.8kvv.com/管道酸洗和二次安置合適要求后，在空載調試系統前必需對管道進行油輪回沖洗。油輪回沖洗可以接納線內輪回沖洗和線外輪回沖洗。所謂線內輪回沖洗指操縱系統自己的事情泵進行輪回沖洗；線外輪回沖洗是指在輪回沖洗中操縱專門的油箱和沖洗泵。因?yàn)樵到y(tǒng)造價很高，為了使系統可以或答應靠的運行，接納了線外輪回沖洗。計劃了專門的沖洗設置裝備擺設對管道進行逐單元沖洗。
After the cargo lifter pipeline pickling and secondary placement of appropriate requirements, before commissioning the system must load the pipeline flushing oil reincarnation. Oil can rinse cycle of reincarnation accepted within line flushing and washing line outside reincarnation. Within the so-called cycle of washing line control system means their own thing rinse cycle of the pump; outside the line refers to the manipulation of reincarnation rinse and rinse tank dedicated flushing pump in reincarnation. Because of the high cost of the original system, in order to make the system run by or agreed to accept the line outside the cycle of water. Plans to set up a special washing equipment placed on the pipe by means flushing.